Description
Advantages
Destroys bacteria and biofilm
Effective also against microorganisms that tolerate chlorine.
Works in dead ends
Effective also in pipework without circulation and with little water exchange.
Does not change taste or smell
The water keeps its natural taste and smell.
Automatic dosing
Ultra-precise measurements, no overdosing and less chemical waste.
Best residual effect
Chlorine dioxide has the best residual effect of all disinfection methods.
Reliable and affordable
A simple design ensures high reliability and low maintenance costs.
Easy to install
Quick installation and user-friendly everyday handling.
4 capacities
Sets available with capacities of 5, 10, 30 and 60 g/h.
Systems and capacity
OCD-162-5 ja -10
For small or medium-sized buildings where water consumption is up to 25 m³/h.
OCD-162-30 ja -60
Applied mainly in waterworks and in the drinking water and food industries.
Installation and operation
The system is installed at the inlet of the building’s water system (next to the water meter) and connected with two hoses or pipes. Chlorine dioxide is produced from aqueous solutions of sodium chlorite (NaClO₂ 7.5%) and hydrochloric acid (HCl 9%). The ClO₂ aqueous solution obtained from the controlled reaction of the two chemicals is dosed evenly according to water consumption using a digital dosing pump.
Legionella – growth sites and infection risk
Legionella growth sites
- Water at a temperature of 20–50 °C
- Pipes with little or no water flow
- Biofilm or a layer of dirt on the walls of pipes and tanks
- Rubber or natural-fiber washers and seals
- Water heaters, tanks and hot water systems
- A layer of limescale and rust in pipes, showers and taps
Infection risk (aerosols)
- Showers and taps
- Hot tubs
- Cooling towers and air conditioner evaporative condensers
- Decorative fountains, especially indoors
- Food display cases with a misting system
- Garden hose irrigation systems
Who is it for?
Oxiperm Pro ensures effective water disinfection for all end users.
